成人美女视频在线观看_夜夜嗨精品手机直播_亞洲人成網站999久久久綜合_曰本a级毛片免费视频_亞洲歐美日韓高清在線看_快播电影a网站大全_中文字幕 日本有码_最近中文字幕mv免费高清视频8_51成品网站w灬源码16章节_三级片手机在线播放麻豆

Vacuum pump is a kind of device to produce, improve and maintain vacuum in a closed space by various methods. Vacuum pump can be defined as a device or equipment that uses mechanical, physical, chemical or physicochemical methods to extract air from the container to obtain vacuum. The use of mechanical movement (rotation or sliding) to obtain vacuum pump, known as mechanical vacuum pump. What should be paid attention to when removing and washing mechanical vacuum pump?

1. Disassembly and cleaning of mechanical vacuum pump should be carried out in the clean room. During disassembly and cleaning, attention should be paid to the original location, square and combination tightness of each component, and records should be made to avoid wrong installation;

2. When taking out the rotating blade and rotor, it is necessary to hold the rotating blade tightly by hand. The reason is that the rotating blade is subject to large spring force, and it is easy to fly out of hand if you are not careful, which will damage the edge or surface of the rotating blade and can not be used any more.

3. The removed parts should be separated and properly handled to avoid mutual collision or loss.

4. During assembly, a small amount of vacuum pump oil should be coated on the surface of rotating parts for lubrication. Pay attention to cleaning. It is strictly prohibited that iron chips, mud, sand and dust fall into the vacuum pump. The installed vacuum pump should rotate easily without uneven weight and blocking.

5. After the final assembly, add vacuum pump oil from the oil filling hole to the oil mark.

6. Before start-up, a small amount of vacuum pump oil should be injected into the suction port to make the vacuum pump fully lubricated. (the reassembled vacuum pump should be tested for several hours to see if it meets the requirements.)